LUSTER FIRE RETARDANT PAINTLUSTER PAINTS
Description: LUSTER FIRE RETARDANT PAINT is a solvent based product that with stands heat up to 400 degrees for 30minutes depending on coverage. It is pigmented to desired colour and varnish for furniture is also available.
Area of use: it is recommended for both interior and exterior of buildings. It is suitable for painting building structures exposed to fire. As a result of its outstanding properties the product can be applied on new and old surfaces.
Substrates: Concrete (including lightweight concrete), cement rendering,
asbestos cement panels, masonry, gypsum finish plaster, plaster board ,dry lining, metals, wood and furniture.
Product
Characteristics:
LUSTER FIRE RETARDANT PAINT is polysiloxane based.
A special silicone resin base, mica and carefully selected light-fast pigment to give a long lasting coating on painted surfaces.
The product’s characteristics include:
- excellent adhesion to virgin wall as well as painted wall
- very good weathering resistance
- non-fading
- resistance against algal and fungal growth
- ease of application
- fast drying
- easily recoatable
- high opacity
- fire retardant up to 30 minutes.
Physical constants:
Specific gravity 1.00 – 1.10 g/cm3
Theoretical spreading rate: 14 m2 / liters at 25 microns. depending on the absorbency of the substrate.*
Finish: Semi Flat
Colour range: More than fifty different colours including white, pastel and
deep shades are available. Check LUSTER Colour chart. The product can also be provided in customized shades.
* A practical spreading rate will depend on the nature of the substrate and the relevant conversion factor.
Application Details:
Surface Preparation: Surface to be painted must be stable, clean, dry and firm.
Remove dirt, oil and greasy materials, dust, all loose and flaky parts, old and weak paint film and any other surface contaminants by suitable mechanical and or chemical means
Paint application: Apply by Airless spray, Air spray, or paint by brush.
Flash point: 25oC
Drying time: 2 – 4 hours
Overcoating time: 24 hour @ 25oC
Application method: Airless spray, Air spray, or paint by brush.
Thinner: If required thin with not more than 5% Luster Thinner HRXD
Cleaning of tools: Clean immediately after use with Luster Thinner HRXD.
Packaging: 20 liters and 5 liters metal container.
Storage: Store in cool, dry conditions. Containers that are opened must
be carefully resealed and kept upright to prevent leakage.
Disposal: Dispose off all used cans according to local and state
applicable regulations.
Safety Instructions: Handle with care. Before and during use, consult the product safety data sheet and follow all the safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Apply only in well ventilated areas.
Contact us at the Consulting WP office nearest to you or submit a business inquiry online.
We were amazed by how little effort was required to have a beautiful painted apartment. Luster paints truly delivers quality paints
