LUSTER Roof CoatingLUSTER PAINTS
Description: LUSTER Roof Coating is a two-component, acrylic polyurethane coating with good gloss and colour retention. The product has good resistance to water, impact, abrasion and harsh weather conditions. The two-component are mixed together prior to use.
Area of use: It is recommended for both interior and exterior, metals, wood and pretreated aluminium sheet. It is suitable for re-painting of Aluminium Roofing sheets.
Substrates: Steel, iron, galvanizing, aged fiberglass, concrete, cement rendering, asbestos cement panels, masonry, gypsum finish plaster, plasterboard, wood and pretreated aluminium coil.
Product Characteristics: LUSTER Roof Coating is a long lasting paint. It is based on acrylic polyurethane, carefully selected light-fast pigments to give a long lasting coating on painted surfaces and poly isocyanate hardener.
Product
Characteristics:
- excellent adhesion
- very good weathering resistance
- non-fading
- resistance against algal and fungal growth
- ease of application
- easily recoat able
- good impact resistance
- high opacity
Physical constants:
Physical constants: Specific gravity 1.00 – 1.20 g/cm3.
Theoretical spreading rate: 10.4 m2 / liter-50 micron depending on the absorbency of the substrate.*
Finish: Semi-gloss
Colour range: 12 different colours including Leaf Green, Terracotta, Holy Bush Green and deep shades are available. The product can also be provided in customized shades.
* A practical spreading rate will depend on the nature of the substrate and the relevant conversion factor.
Volume solids, %: 52 ± 1
Flash point: 33°C
Dry to touch: 1 hours (27°C)
Fully cured: 7 days at 27°C.
Application Details:
Mixing ratio: 3:1; Base: Curing agent; by volume
Application method: Brush / Conventional spray
Pot life: 4 hours (20°C) 1 hour (40°C)
Cleaning of tools:THINNER 4018
Indicated film thickness, dry:50 micron
Indicated film thickness, wet: 100 micron
Recoat interval, min: 5 hours (27°C)
Recoat interval,
max: None
Safety Instructions: Handle with care. Before and during use, consult the product
safety data sheet and follow all the safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well-ventilated areas.
Surface Condition:
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. Remark:
Drying data is given on the assumption that proper ventilation is provided. High humidity and condensation during application may adversely affect the film formation. When applying LUSTER Roof Coating by spray, thinning is recommended to obtain the best possible finish. The necessary amount of thinning will depend on the actual conditions.
Note:Curing agent is sensitive to moisture. Store in a dry place and keep cans tightly closed until use. Open cans with caution due to possible high pressure. Even small traces of water in the mixed paint will reduce pot life and result in film defects.
LUSTER ROOF COATING is for professional use only.
Contact us at the Consulting WP office nearest to you or submit a business inquiry online.
We were amazed by how little effort was required to have a beautiful painted apartment. Luster paints truly delivers quality paints
