LUSTER SATINLUSTER PAINTS
Description:A fashionable water-based paint that is formulated with high quality pigments which gives the appearance similar to conventional gloss paint.
TYPICAL USES: For protection and decoration of normal interior walls and ceiling surfaces where a satin finish is required.
PRODUCT INFORMATION:
Colour: over 80 different types.
Finish: Satin
Reduction Thinner:Not applicable
Clean up Thinner : Water
Package size: 20Ltrs weight/Package 24kg±2
Solids by volume: Not applicable
Theoretical Coverage :14m2/L at 1 coat
Recommended Film Thickness: Not applicable.
Drying Time: 2 hours at 28˚C
Liquid Water Transmission Rate:Not applicable
Accelerated Weathering test: Not applicable
1000hrs QUV-B: Not applicable
Shelf Life: 12 months
Method of Application: Brush, Roller, or Spray
TYPICAL USES: For protection and decoration of normal interior walls and ceiling surfaces where a satin finish is required.
SURFACE PREPARATION:
Ensure surface is not smooth which may impair adhesion. Ensure surface is free from dust, grease andLoose paint. Powdery and absorbing surface are required
To be coated with stabilizing solution before applying 2 coats of Luster Wall Satin. For a previously painted surface, render Surfaces as appropriate and then apply one or two coats
Of Luster Wall Satin subject to substrate.
WORKING POT LIFE: Not applicable
AIRLESS SPRAY
Pressure: 2000 psi, tip 0.015” – 0.021”
BRUSH: Not applicable.
ROLLER: SUITABLE.
THINNER: Not applicable.
CLEAN-UP: Clean all equipment immediately after use with water.
Product
Characteristics:
– Excellent protection against fungicides & algae.
– Unsuitable on hot surfaces of constant temperature (70)
– Excellent washability to remove dirts and stains.
– Does not generate heat.
– Odourless.
– Glossy Emulsion.
– Ecological friendly.
– High resistance to yellowing.
– High scrub resistance.
– Fast drying.
– High coverage.
– Low PVC.
– Painted surface can be washed repeatedly without the film losing its sheen.
– Not suitable for surfaces in constant contact with solvents.
Physical constants:
PERFORMANCE AND LIMITATION
* For use with operating temperature of 28˚C
* The density at room temperature is 1.2
- The viscosity at room temperature is 1-3 poises.
- The gloss level is 58% on 60 degree gloss meter.
SAFETY PRECAUTION:
Relatively harmless paint. Product should be used in well ventilated areas. Avoid skin and eye contact by using gloves, goggles, and face masks. Provide adequate ventilation. If product comes in contact with skin, wash thoroughly with plenty water and soap. If the eyes are contaminated flush with water for up to 15minutes and seek medical attention.
SHIPPING WEIGHT: Not applicable
STORAGE:Exposure to high temperature above 30˚C must be avoided.
Contact us at the Consulting WP office nearest to you or submit a business inquiry online.
We were amazed by how little effort was required to have a beautiful painted apartment. Luster paints truly delivers quality paints
